16. In the
Private Network Identifier (PNI)
box, type a value for the private network
identifier.
17. In the
Call Type for outgoing direct dialed TIE route (CTYP)
list, select
Unknown
Call type (UKWN)
.
18. Select the
Insert ESN Access Code (INAC)
check box.
19. Click
Save
.
The route you created appears on the
Route and Trunks
page.
Creating virtual trunks (LD 14)
About this task
Create a virtual trunk for LD 14 in the CS 1000 Element Manager.
Prerequisites:
• Log on to the CS 1000 Element Manager.
Procedure
1. In the Element Manager navigation pane, select
Routes and Trunks > Routes and
Trunks
.
The
Routes and Trunks
page appears.
2. Expand the desired Customer Number.
3. Under the Customer number, click
Add trunk
beside the route to which you want
to add the trunk.
The
New Trunk Configuration
page appears.
4. On the
New Trunk Configuration
page, select
Multiple trunk input number
(MTINPUT)
if you configure multiple trunks.
The maximum number of trunks is 32.
5. In the
Trunk data block (TYPE)
list, select
IP Trunk (IPTI)
.
6. In the
Terminal Number (TN)
box, type the trunk terminal number.
7. In the
Designator field for trunk (DES)
box, type a meaningful name for the
trunk.
8. Make sure that
Extended Trunk (XTRK)
is
Virtual trunk (VTRK)
.
9. In the
Route number, Member number (RTMB)
box, type the route number and
member number separated by a space.
10. In the
Start arrangement Incoming (STRI)
list, select
Immediate (IMM)
.
CS 1000 configuration
28 Avaya Hospitality Messaging Server 400 Installation and Commissioning
March 2012