manualshive.com logo in svg

Avaya IP Agent, Installation And User Manual

Share
Download
Avaya IP Agent Installation And User Manual Download Page 19

Avaya IP Agent configurations

Issue 1.1 August 2004

19

IP Telephone configuration

The IP Telephone configuration is similar to that of the Telecommuter configuration. 
Through IP Agent, agents can control an IP telephone, use the features of the telephone 
through the IP Agent interface, and take advantage of the regular IP Agent features. 

What you need to know about the IP Telephone configuration

The following is a list of the IP Telephone configuration requirements and capabilities:

●

Connection - IP network connection for the IP telephone and a TCP/IP network 
connection for the personal computer

●

Personal computer hardware - Network Interface Card (NIC) for connection to the 
Avaya communication server

●

Telephone set - Any Avaya IP telephone that supports the Computer Telephony 
Integration (CTI) feature and is supported by your Avaya communication server

●

Voice Quality - Dependent on the IP telephone, available network bandwidth, and 
network stability

●

Agent Greetings - Not supported in this configuration

●

Avaya communication server connections - One user connection

CallMaster VI configuration (DCP connection)

The Avaya CallMaster VI is a small telephone with eight buttons, two headset jacks, and 
DCP (Digital Communications Protocol) connectivity. This telephone is connected to a 
personal computer through a serial (RS-232) connection. This configuration is for use only 
inside the contact center in conjunction with CallMaster telephones. Connectivity for this 
configuration is provided through a DCP connection to the Avaya communication server 
and does not require a TCP/IP network connection.

What you need to know about the CallMaster VI configuration

The following list provides Avaya CallMaster VI configuration requirements and 
capabilities:

●

Connection - DCP connection for the Avaya CallMaster VI telephone set and a serial 
(RS-232) connection between the Avaya CallMaster VI and the personal computer

●

Personal computer hardware - Serial (RS-232) port

●

Telephone - Avaya CallMaster VI

●

Voice quality - High

Summary of Contents for IP Agent































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands