Avaya G860, Installing And Operating

Page: 43 / 214

Issue 1 October 2007 43
3. Installation Process Flow
3 Installation Process Flow
The installation process flow depicted in the figure below illustrates the steps involved
in the installation process.
Customers should prepare the site according to the requirements described in the Site
Preparation section prior to the installation of the Avaya G860 Media Gateway
equipment. The Hardware Installation phase comprises:
„
Unpacking the equipment
„
Mounting the chassis on the rack
„
Connecting network, console, power and earthing cables
„
Powering up the system
„
Verifying that the system is in working order
Next is the Software Installation phase, which consists of:
„
Defining IP parameters
„
Configuring Sun™ Solaris™ OS
„
Installing and configuring the System Controller software
„
Connecting to external equipment
„
Installing the trunk cables.
The final installation phase consists of configuring the Element Management System
(EMS) or alternative MIB Browser.
Note: The installation process includes installation of the system control software
on the SC boards only. All boards come with pre-installed firmware and
embedded software as appropriate. The SC boards come with a pre-
installed Sun™ Solaris™ operating system