Avaya G860, Installing And Operating

Page: 92 / 214

92 Installation & Operation Manual
Avaya G860 Media Gateway
What backup do you choose (1-Database/2-Full) ? 2
4. The Full Backup procedure is activated. You are prompted to confirm the action.
Type
y and press Enter .
----------------
Full Backup
-----------
This tool will create a copy of complete software installation
including configuration database.
You must run this tool only on ACTIVE SC !!!!!
Make a backup (y/[n]) ? y
5. You are prompted to accept the default backup file name ( Project.backup.tar ) or
type in a new name for the backup file. In the example below, the file is named
Project.backup_02_12_2004.tar. The part o
f
the file name,
"Project" must remain the same. You may enter any name
instead of the "backup_02_12_2004" part of name of the file.
The File name must end with the extension, ".tar".
6. Press Enter . The backup file is created.
Backup file name [/Project.backup.tar]:
/Project.backup_02_12_2004.tar
Create backup file /Project.backup_02_12_2004.tar
Execute tar cvf /Project.backup_02_12_2004.tar /Project ...
7. .The full list of all of the software installation and configuration elements are listed
until the backup file creation is complete.
8. Use ftp to copy the tar file to a location outside of the SC board for safekeeping.
10.2 Restoring SC Software from Backup
Restoring the SC software from a backup tar file is provided as a precautionary
measure and is intended for use in extreme cases only. Restoring the SC software
from a backup
tar file requires that the SC boards, and therefore the entire system, be
non-operational.
Note: The Restore procedure must be performed on both of the SC boards.