Avaya G860, Installing And Operating

Page: 199 / 214

Issue 1 October 2007 199
18. Appendix - Utilities
steps:
1. Run the UDP2File utility.
2. Determine the trace file name.
3. Determine the UDP port.
4. Mark the PSTN Trace check box.
5. Click the Run button. The UDP2File utility starts to collect the trace messages.
6. Activate the Web page by entering <Avaya G860 Media Gateway IP
address>/TrunkTraces and choose the Trunk Traces tab
(e.g.,http://10.8.8.101/TrunkTraces).
7. Use the user and password, which is the same for the unit.
8. In the Web page, set the trace level of each trunk.
9. Enable the trace via the Web.
10. Determine the UDP port (the same as in step 3).
11. Click the SUBMIT button. The board starts to send the trace messages.
12. In the UDP2File utility (Refer to the figure below) you should see the number in
the packets counter increasing.
Figure 54: Trunk Traces Screen
Figure 55: UDP2File Utility Dialog Box