Avaya G860, Installing And Operating

Page: 83 / 214

Issue 1 October 2007 83
9. Configuring System Controller Software for the First Time
>>> Tune up /tmp filesystem ...
>>> Make backup of modified file /etc/vfstab ...
>>> Make backup of modified file /etc/nsswitch.conf ...
>>> Make record of new file /etc/resolv.conf ...
>>> Extract custom configuration files ...
>>> Copy Project/Downloads/cmp_files/TP1610*.cmp files to
/tftpboot ...
>>> Copy Project/Downloads/baseinifile_files/TP1610.ini file to
/tftpboot/TP1610.ini ...
>>> Copy Project/Downloads/baseinifile_files/NormalTP1610.ini
file to /tftpboot/NormalTP1610.ini ...
>>> Copy Project/Downloads/baseinifile_files/RedundantTP1610.ini
file to /tftpboot/RedundantTP1610.ini ...
>>> Copy Project/Downloads/cmp_files/TPTPM*.cmp files to
/tftpboot ...
>>> Copy Project/Downloads/baseinifile_files/TPTPM.ini file to
/tftpboot/TPTPM.ini ...
>>> Copy Project/Downloads/baseinifile_files/NormalTPTPM.ini
file to /tftpboot/NormalTPTPM.ini ...
>>> Copy Project/Downloads/baseinifile_files/RedundantTPTPM.ini
file to /tftpboot/RedundantTPTPM.ini ...
>>> Copy Project/Downloads/dat_files/* file to /tftpboot ...
>>> Backup original versions of /tftpboot files ...
**************************************
* IF CONFIGURATION IS DONE OK *
* YOU MUST REBOOT THE SC !!!!!!!!!!! *
**************************************
11. When installing software on the first SC board, type n and press Enter .
Note: For Redundant systems with two SC boards, DO NOT reboot the SC
boards until after both are configured.
For Simplex configurations with only one SC board:
If your hardware configuration contains only one SC board, reboot now and
confirming the reboot command when prompted.
IMPORTANT: If you have second SC, DO NOT REBOOT this SC until
installation of second SC already done !!!
Reboot both SCs at the same time.
Do REBOOT now (n/y) [y]:
y
Are you sure (n/y) [y]:
y