Avaya G860, Installing And Operating

Page: 89 / 214

Issue 1 October 2007 89
9. Configuring System Controller Software for the First Time
9.7 Software Testing
To test that the software has been properly installed and configured, ping the SC
boards (to both the local IP addresses and the global IP address) note if their global IP
addresses can be accessed.
¾
To ping the SC boards from the PC using Windows, take these 2
steps:
1. Using a Command window, at the command prompt, enter ping [Global IP
address of an SC board] . A response should be received.
Note: If the Ping has not received the proper response, check the physical
connections to the network.
2. Using Telnet, access each SC board and run the command: tools d
The Analytical tool runs various tests. Verify that the test results are all OK.