Rev: 10102000
D-Link
DI-707 Quick Installation Guide
1. Hardware Installation
A.
Setup LAN connection:
connect
an Ethernet cable (provided) from your computer’s
Ethernet port to one of the LAN ports on the DI-707.
B.
Power on:
connect the power cord to a power outlet and turn the power switch on. The
DI-707 will automatically enter the self-test phase. When in the self-test phase, the
indicators M1 and M2 will be lit for about 5 seconds, and then M1 and M2 will flash
three times to indicate that the self-test operation has finished. Finally, the M1 will
flash continuously once per second to indicate that the DI-707 is in normal operation.
C.
Setup WAN connection:
connect
the network
cable from your cable or DSL modem
to the WAN port of the DI-707. If you don’t see a link light on the WAN LED after
everything is connected and turned on, try the network cable provided with the DI-707.
2. Find and Write Down Your Computer's Internet Settings
A.
Open the Control Panel
B.
Find and Double Click the Network Icon
C.
Click the Identification Tab
