Install the EPN
Issue 7 November 2003
4-35
555-233-115
Re-record Announcements (TN750/B Only)
1. The off-site STS translation upgrade does not preserve the contents of
recorded announcements. Therefore, if a TN750/B Announcement circuit
pack resides in the system, re-record the announcements that were stored
on the circuit pack.
NOTE:
Even though a system may have a mixture of TN750/B, TN750C and
TN2501AP announcement/integrated announcement circuit packs,
you do not need to re-record TN750C or TN2501AP integrated
announcements.
Administer Fiber Links
1. After all fiber optic equipment is installed, refer to
Check Link Status
1. Type display communication-interface links and press
Enter
. Compare it
with the earlier status.
2. Type status link number and press
Enter
. Repeat this step for each link.
Resolve Alarms
1. Type display alarms and press
Enter
to examine the alarm log. Resolve
any alarms that may exist.
Enable Alarm Origination to INADS
1. Get the DOSS order number of the upgrade from the project manager and
ask the regional Customer Software Administration to complete the steps
in the shaded box. See
‘‘How to get technical assistance’’ on page -xiii
telephone numbers.
NOTE:
As part of the system registration process, the INADS Database
Administrator enables Alarm Origination.
2. When administration is completed, log in as craft at the
Login:
prompt.
Register the Switch for Maintenance
The Automatic Registration Tool (ART) is a web-based tool that permits field
technicians and TSO Database Administration (DBA) to register U.S. direct
channel products.
