Avaya DEFINITY Server R Manual Download Page 38

Page: 38 / 550

Upgrading Release 9/10r to Avaya DEFINITY Server R
Running Avaya Communication Manager

555-233-115

1-22

Issue 7 November 2003

3. If the system has IP endpoints registered, unplug the Ethernet cable from

the TN799 (C-LAN) circuit pack.

This disconnects (unregisters) all IP endpoints.

4. Type set time and press

Enter

Ensure that the system date and time are set correctly.

Installation (direct connection)

If you have a direct connection between the RFA and the switch:

1. Go to the RFA website, and, following the instructions in the “Deliver to

G3r/G3si/G3csi” chapter of the RFA Job Aid, deliver the License File.

NOTE:

This procedure sends the License File to the switch and installs it.

2. If the system has IP endpoints registered, and you unplugged the Ethernet

cable from the TN799 (C-LAN) circuit pack, replug the cable.

This re-registers the IP endpoints.

Installation (no direct connection)

If you do not have a direct connection between RFA and the switch:

1. Go to the RFA website, and, following the instructions in the “Deliver to

G3r/G3si/G3csi” chapter of the RFA Job Aid, deliver the License File to
your laptop/PC.

2. Open the License Installation Tool (LIT) application at your laptop/PC.

3. Use the LIT instructions to add a switch connection profile to the tool.

4. Use the LIT instructions to install the License File on the switch.

5. If the system has IP endpoints registered, and you unplugged the Ethernet

cable from the TN799 (C-LAN) circuit pack, replug the cable.

This re-registers the IP endpoints.

Administer No-License/Emergency Numbers

1. At the SAT type change system-parameters features and press

RETURN

The Feature-Related System Parameters screen displays.

2. In the

Emergency Numbers - Internal

field (optional) type a valid

extension.

NOTE:

This number cannot be a hunt group or ACD number.

Summary of Contents for DEFINITY Server R







































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DEFINITY Server R

Reviews:

Related manuals for DEFINITY Server R

Brands by name

Popular brands

Avaya DEFINITY Server R, Manual

Search results

Summary of Contents for DEFINITY Server R

Reviews:

Related manuals for DEFINITY Server R

Brands by name

Popular brands