manualshive.com logo in svg

Avaya D260, Using Manual, Page: 78 / 99

Share
Download
Avaya D260 Using Manual Download Page 78

F-Keys

The “F-Keys” menu is entered through the menu by pressing the activity menu key 

 in idle.

This menu controls functional keys to be set on the handset. This means that the handset user

can add certain functional numbers in this menu; as for example the number to the user’s mailbox.

When there are F-Keys saved in the list it is possible to call each F-Key number by pressing the

left softkey 

Call

.

Additionally, each F-Key contact can be edited directly from the F-Key list by pressing the middle

softkey 

Edit

.

When pressing the right softkey 

More

 the following options are possible to select:

•

Add F-Key

: To add a new F-key, press the right softkey 

More

 and then select 

Add F-Key

. A

menu with two settings will pop-up, allowing the user to set a name and a phone number.

Press 

Edit

 in order to type the needed information. For the new F-key to be saved, press the

left softkey 

Save

, and this F-key will be added to F-keys.

•

Edit F-Key

: This feature enables that an existing F-key can be edited, if the name or number

need changing.

•

Delete F-Key

: By selecting 

Delete F-Key

 the message “Delete current contact from F-Key

list?” appears on the screen, and it is possible to press the left softkey 

Yes

 to delete the

currently highlighted F-Key, or to press the right softkey 

No

 to cancel and go back to the F-

Keys menu.

•

Delete all F-Keys

: With this function it is possible to delete all the saved F-Keys on the

handset. When selecting “Delete all F-Keys” the message “Delete entire F-Key list?” appears,

and by pressing left softkey 

Yes

 this action is performed, whereas pressing the right softkey

No

 cancels the action and returns to the F-Keys menu.

Menu operation

August 2020

Using Avaya Wireless Handset D260

78

Comments on this document? [email protected]

Summary of Contents for D260




































































































Reviews:

No comments