manualshive.com logo in svg

Avaya D260, Using Manual, Page: 40 / 99

Share
Download
Avaya D260 Using Manual Download Page 40

•

Save as contact

: With this feature it is possible to save the number in the call list as a

contact.

•

Append to contact

: This function makes it possible to add the number in the call list to an

existing contact.

•

Send message

: With this feature a text message can be sent to the selected number in the

call list.

•

Edit before call

: With this function the number in the call list can be edited before calling.

•

Delete item

: By selecting “Delete item” the following text message is displayed:

Delete current item from list?

To delete the item from the call list, press the left softkey 

Yes

.

To return to the call list, press the right softkey 

No

.

•

Delete all items

:

• This feature makes it possible to delete all items in the specific call list. By selecting “Delete

all items” the following text message is displayed:

Delete all items in this list?

To delete all items in the specific list, press the left softkey 

Yes

.

To return to the call list, press the right softkey 

No

.

Connectivity

The 

Connectivity

 menu is entered in the menu by pressing the menu activity key 

 in idle.

Menu operation

August 2020

Using Avaya Wireless Handset D260

40

Comments on this document? [email protected]

Summary of Contents for D260




































































































Reviews:

No comments