manualshive.com logo in svg

Avaya D260, Using Manual, Page: 54 / 99

Share
Download
Avaya D260 Using Manual Download Page 54

As seen in the images above each color of the LED signal (green, yellow, and red) can

respectively be configured to indicate:

• Missed call: The LED signal blinks in the chosen color when there is a missed call.
• Voice message: The LED signal blinks in the chosen color when there is a voice mail

message that has not been listened.

• Low battery: The LED signals blinks in the chosen color when the battery is low (below 5%

battery on the handset).

• Off: The LED signal is disabled, and does not blink in any situation.

Power save

The power save option makes the handset less battery consuming by turning off the display after

a certain amount of time.

In the images above, it is displayed how the power save can be set between 5 seconds and 60

seconds. A certain time interval is chosen by pressing the left softkey 

Select

 when the desired

time interval is highlighted.

Menu operation

August 2020

Using Avaya Wireless Handset D260

54

Comments on this document? [email protected]

Summary of Contents for D260




































































































Reviews:

No comments