manualshive.com logo in svg

Avaya D260, Using Manual, Page: 73 / 99

Share
Download
Avaya D260 Using Manual Download Page 73

Drafts

When pressing the right navigation key one time in the messaging menu, the submenu Drafts is

opened. In this menu drafts are saved if a message has been written but was not sent.

When pressing select on a highlighted draft, this is opened according to the last time that it was

edited, and it is possible to edit it, and send it again.

To write a new message press the middle softkey 

New

 in this ‘Drafts’ menu.

More options

Press the right softkey 

More

 in Drafts to view the following fields:

•

Send message

: Use this option to edit and send the message.

•

Delete message

: Use this option to delete the selected message.

•

Delete all messages

: Use this option to delete all messages in the ‘Drafts’ menu.

Message saved as a draft

When writing a new message and then exiting with the red on-hook key before the message is

sent, this message can be saved as a draft. This is shown in the following image.

Messaging

August 2020

Using Avaya Wireless Handset D260

73

Comments on this document? [email protected]

Summary of Contents for D260




































































































Reviews:

No comments