manualshive.com logo in svg

Avaya D260, Using Manual, Page: 71 / 99

Share
Download
Avaya D260 Using Manual Download Page 71

Press the left softkey to reply to the received message. The reply message can either be sent as

‘Normal’ or ‘Urgent’, and when choosing either of these two options the message is sent to the

counterpart from whom it was received.

Note:

When a new message is received and has not yet been read the following message icon 

is displayed in the status bar at top of the display.

Four messaging submenus

When opening the messaging menu, it is possible to select the following submenus:

• Drafts
• Inbox
• Sent messages
• Settings

The submenus are organized in tabs whereby the left and right navigation keys are used to

navigate between them.

Inbox

Inbox

 is the submenu that is opened when the 

Messaging

 menu is selected. This menu contains

all received messages on the handset.

The received messages is displayed in the following sequence:

• Urgent messages
• Normal messages

Messaging

August 2020

Using Avaya Wireless Handset D260

71

Comments on this document? [email protected]

Summary of Contents for D260




































































































Reviews:

No comments