manualshive.com logo in svg

Avaya D260, Using Manual, Page: 63 / 99

Share
Download
Avaya D260 Using Manual Download Page 63

•

Idle clock (dimmed)

: By choosing this option the handset will show the idle screen with

dimmed lights when the handset enters power save mode when in charger.

•

Startup image (dimmed)

: If this option is selected the handset will show the startup image

with dimmed lights when the handset enters power save mode when in charger.

Bluetooth

The bluetooth feature enables the handset to be connected to a bluetooth headset.

When the handset is connected to a bluetooth headset the audio on all calls is routed through the

bluetooth headset. When receiving an incoming call alerting is heard both from the handset and

the paired bluetooth headset.

Enable or disable

Bluetooth can either be enabled or disabled on the handset. The handset can only be paired with

a bluetooth device when bluetooth is enabled. With bluetooth enabled an icon 

 is displayed in

the status bar to indicate that bluetooth is enabled on the handset.

Settings

August 2020

Using Avaya Wireless Handset D260

63

Comments on this document? [email protected]

Summary of Contents for D260




































































































Reviews:

No comments