manualshive.com logo in svg

Avaya D260, Using Manual, Page: 68 / 99

Share
Download
Avaya D260 Using Manual Download Page 68

As seen above the text messaging feature is enabled on the handsets via Management on the

base station web interface. With this feature enabled it is possible to send text messages from one

handset on the system to another handset on the system. In this case, the Text Messaging needs

to be enabled (with or without a server).

Additionally, it is possible to send the text messages via a text messaging server (MobiCall server)

which enables handsets on different systems of base stations to send text messages to one

another. When using a text messaging server for text messaging the “Text Messaging” must be

“Enabled”, the “Text Messaging & Alarm Server” needs to be filled out, and the correct port

number must be entered in “Text Messaging Port”. An example of this is shown in the following

image:

Menu operation

August 2020

Using Avaya Wireless Handset D260

68

Comments on this document? [email protected]

Summary of Contents for D260




































































































Reviews:

No comments