Autonics LP-A Series, User Manual

Page: 84 / 106

9 Appendix
84 © Copyright Reserved Autonics Co., Ltd.
Name Function
Initial
value R/W
GP
device
LP
device

Turns OFF when power is reset
9.1.4.8 System Setting
Name Function
Initial
value R/W
GP
device
LP
device
Set all
output
prohibit

When it is ON, the port out is
prohibited, all output ports are OFF
OFF W UB744070 F00070
Set output
reset
prohibit

When it is ON, the output reset is
prohibited
OFF W UB744071 F00071
Start
periodic
operation

When it is ON, the periodic operation is
set and periodic operation starts
depending on periodic operation word
setting

When it is OFF, operate at the
minimum scan speed as possible
OFF W UB744074 F00074
Change
periodic
operation
time

When it is ON, change periodic
operation time
OFF W UB744075 F00075
Change
periodic
interrupt
time

When it is ON, change periodic
interrupt time
OFF W UB744076 F00076
Keep
output
status
during
stop

Turns ON when output status is
maintained

Turns OFF when output status is not
maintained
OFF UB744077 F00077
Extension
module
function
activate
condition

Reset when ‘extended module
operating condition’ for parameter
common setting of atLogic checked
and downloaded ‘operates only in run
mode’.

Set when ‘extended module operating
condition’ for parameter common
setting of atLogic is checked and
downloaded ‘operates in stop mode’.

When uploading from the LP device,
the data is no retrieved from the
parameter file but uploaded with the
set by the special register.
OFF W UB744078 F00078
Default
filter
setting
flag

When it is SET, operate filters on all
undefined modules in parameters as
default values

When it is RESET, operate without
filters on all undefined modules
OFF W UB744079 F00079