Autonics LP-A Series, User Manual

Page: 74 / 106

8 Software
74 © Copyright Reserved Autonics Co., Ltd.
8.2.3 Connecting atLogic and LP Device
Connect atLogic and LP-A Series to download/upload projects and upgrade firmware. The
communication between PC and LP-A series uses serial interface (RS-232C), Ethernet, USB
interface.
the method for connecting atLogic and LP deive is as follow below.
1st Connect the PC and the LP with one of the serial communication cable, LAN cable,
USB mini cable.
2nd Turn on the PC and after boot is completed, turn on the LP device.
3rd When the LP finishes booting, touch the upper left corner of the screen to call up the
system setup menu.
The upper left corner of the screen is the factory default for the system setting menu
call button position.
4th Touch "Communication Settings" in the [Environment] menu.
5th Touch the interface of the internal channel / EDITOR row to select the interface that
matches the connected cable.
6th Touch "Settings" to set detailed specifications for each interface.

RS-232C
Item Specification
Communication
speed
115200 bps
(Must be set to the same as atLogic. atLogic specification is
fixed as 115200 bps.)
Data bit 7bit, 8bit
Flow control NONE, XON/XOFF, DSR/DTR
Parity bit NONE, ODD, EVEN
Stop bit 1bit, 2bit

Ethernet
Item Specification
Port number 0 to 65535
7th Run atLogic.
8th Click “Communication Options” on the [Online] menu.
9th When 'Communication Options' window appears, select the interface to which PC and
LP are connected in ‘Connection Type’, set ‘Setting Item’ at the bottom, and click
'Confirm’.
10th
Click “Connect” from the [Online] menu of the toolbar to connect atLogic and LP.
11th To download the project from atLogic to LP, click “Download” under [Online], and click
"Upload" to upload from LP to atLogic.