Autonics LP-A Series, User Manual

Page: 9 / 106

Cautions during Use
© Copyright Reserved Autonics Co., Ltd. ix
Cautions during Use
 Follow instructions in ‘Cautions during Use’. Otherwise, it may cause unexpected accidents.
 24VDC power supply should be insulated and limited voltage/current or Class 2, SELV
power supply device.
 Install a power switch or circuit breaker in the easily accessible place for supplying or
disconnecting the power.
 Operate the product after supplying power to the product, input/output equipment, and load.
If operate product before supplying power, it may result in output error or malfunction.
 Keep away from high voltage lines or power lines to prevent inductive noise.
Do not use near the equipment which generates strong magnetic force or high frequency
noise.
 Make a required space around the unit for radiation of heat, and do not block ventilation
openings.
 Do not push the touch panel with a hard and sharp object or push the panel with excessive
force.
It may result in fire or malfunction.
 When skin is smeared with liquid crystal from the broken LCD, rinse with running water for
over 15 minutes.
If it gets into the eyes, rinse eyes with running water for over 15 minutes and contact a
doctor.
 This unit may be used in the following environments.
①
Indoors (in the environment condition rated in 'Specifications')
②
Altitude max. 2,000m
③
Pollution degree 2
④
Installation category II