Autonics LP-A Series User Manual Download Page 26

Page: 26 / 106

1 Overview

© Copyright Reserved Autonics Co., Ltd.

1.7.4

CAN Interface

It is allowed to connect with ARD Series, Autonics’ Field network devices,using CAN

communication.

No.

Color Use

Arrangement

Black

24VDC(-)

Blue

CAN_L

None

SHIELD

White

CAN_H

Red

24VDC(+)

Max. memory size per slave is 8byte.



Digital module (ARM-D): 64 point



Analog module (ARM-A): 16 bit, 4 point

Max. number of connectable slave is 63.

The address 0 is not used and the 1 to 63 is used.

※

Even though the max. number of connectable slave is 63, please connect max. 8 for stabilizing

the system.

1.7.5

Micro SD

Micro SD can cover up to 32GB of external storage.

It supports only external storage of FAT16 and FAT32 file system

Summary of Contents for LP-A Series











































































































Search results

Summary of Contents for LP-A Series

Reviews:

Related manuals for LP-A Series

Brands by name

Popular brands

Autonics LP-A Series, User Manual

Search results

Summary of Contents for LP-A Series

Reviews:

Related manuals for LP-A Series

Brands by name

Popular brands