Autonics LP-A Series, User Manual

Page: 62 / 106

5 System Setting Menu
62 © Copyright Reserved Autonics Co., Ltd.
5.3.5.2 Local Ethernet
Set the Ethernet address of the LP.
Item Description
IP Address Set the IP address of the LP device.
Subnet Mask Set the subnet mask of LP device.
Gateway Address Set the gateway address of the LP device.
MAC Address
Displays the MAC address of the LP device.
5.3.5.3 Brightness
Set the screen brightness.
A bar graph in the center of the screen and a number below the graph indicate the current
screen brightness.
The longer the bar is filled, the brighter the higher the number.
Touch the '-, +' button to adjust the brightness.
5.3.5.4 Clock
Set the date and time.
The date and time set by atDesigner will be downloaded, but also can be modified in the GP unit.
Touch '-, +' button for each item to edit the number and touch 'Save' button to set the date / time.
5.3.5.5 Language
Set the GP’s system language.
Supported languages are Korean (Ko-KR), English (en-US) and can be added further.
After selecting the language, touch the back button '←' to change and apply the language .
5.3.5.6 Screen Test
Diagnose screen colors, pixels, patterns and font displays.
Touch the 'start screen diagnosis' button at the center of the screen to display the screen in the
order shown below, and touch any part of the screen to move on to the next screen.
The diagnosis screen allows to check the color, pixel and font display for any abnormalities.