Autonics LP-A Series, User Manual

Page: 7 / 106

Safety Considerations
© Copyright Reserved Autonics Co., Ltd. vii
Safety Considerations
 Following these safety considerations will ensure the safe and proper use of the product
and help prevent accidents, as well as minimizing possible hazards.
 Safety considerations are categorized as Warnings and Cautions, as defined below:
Warning
Failure to follow the instructions may lead to a serious injury
or accident.
Caution
Failure to follow the instructions may lead to a minor injury
or accident.

Fail-safe device must be installed when using the unit with machinery that may cause
serious injury or substantial economic loss. (e.g. nuclear power control, medical equipment,
ships, vehicles, railways, aircraft, combustion apparatus, safety equipment, crime/disaster
prevention devices, etc.)
Failure to follow this instruction may result in personal injury, economic loss or fire.

Do not use the unit in the place where flammable/explosive/corrosive gas, high humidity,
direct sunlight, radiant heat, vibration, impact, or salinity may be present.
Failure to follow this instruction may result in explosion or fire.

Use the unit within the rated specifications.
Failure to follow this instruction may result in fire or shortening the life cycle of the product.

Do not connect, repair, or inspect the unit while connected to a power source.
Failure to follow this instruction may result in fire.

Check 'Power Wiring', 'Serial Interface', and 'Input/Output Wiring' before wiring.
Failure to follow this instruction may result in fire.

In preparation for product damage, communication error, or malfunction, install external
emergency stop circuit, forward/reverse interlock circuit, limit switch, emergency stop switch,
or other protection circuit.
Failure to follow this instruction may result in personal injury, economic loss or fire.

Do not disassemble or modify the unit.
Failure to follow this instruction may result in fire.

Since Lithium battery is embedded in the product, do not disassemble or burn the unit.
Failure to follow this instruction may result in fire.
 Please contact us for battery replacement.