Autonics LP-A Series, User Manual

Page: 60 / 106

5 System Setting Menu
60 © Copyright Reserved Autonics Co., Ltd.
5.3.5 Environment
5.3.5.1 Communication
Select communication interface and set communication features for each channel type.
Project setting is downloaded from atDesigner, but communication setting can also be modified
from the LP device.
Touch the 'interface (
①
)' for each channel to select the communication interface, then touch the
'Settings (
②
)' button to set the communication details.
Item Description
Inner
(Internal
channel)
EDITOR
Sets the port to be connected to atDesigner (PC).
Interface setting range: RS-232C, Ethernet, USB, Not used
DEVICE-NET
Set CAN communication port.
It can be connected with Autonics ARD Series.
Interface setting range: CAN, Not used
BARCODE1
The serial barcode setting for atDesigner is downloaded.
(Project Properties - Special Device Settings)
Interface setting range: RS-422/485, RS-232C, Not used
BARCODE2
The USB barcode setting for atDesigner is downloaded.
(Project Properties - Special Device Settings)
Interface setting range: USB, Not used
CH1,
CH2, ...
(External
channel)
Protocol
name
The connected device set in project setting for atDesigner is
downloaded.
(Project properties - Device settings – Connected device settings)
Interface Settings Range: The configurable buttons are enabled
according to the protocol.
① ②