AudioCodes LTRT-94602 Manual Download Page 9

Page: 9 / 66

Version 3.2

October 2007

EMS Alarm Guide

1. EMS Alarms

1 EMS

Alarms

System alarms, originated by the EMS and associated with the EMS server and/or all
media gateways managed by the EMS, are listed and described here.

The present version of the EMS supports the following alarms:

SNMP Cannot Bind Alarm - All gateways

Add Node Alarm - Mediant 5000 / 8000 Broadband Access Gateways

Node Connection Lost Alarm - All gateways

Node Connection Establish Alarm - All gateways

Software Mismatch Node Alarm - All gateways

Hardware Mismatch Node Alarm - All gateways

Configuration Mismatch Node Alarm - MediaPacks, Mediant 1000 / 2000 / 3000,
IPMedia 2000 / 3000

Predefine Mismatch Node Alarm - MediaPacks

No Mismatch Node Alarm - All gateways

10.

Upgrade MIB Version Alarm - All gateways

11.

Server Startup Alarm - All gateways

12.

Not Enough Disk Space - All gateways

13.

MG Software Upgrade Alarm - Mediant 5000 / 8000

14.

Software Replace Alarm - All gateways

15.

Hardware Replace Alarm - MediaPacks, Mediant 1000 / 2000 / 3000, IPMedia 2000 /
3000

16.

HTTP Disabled Alarm - MediaPacks, Mediant 1000 / 2000 / 3000, IPMedia 2000 /
3000

17.

HTTP and HTTPS Disabled Alarm - MediaPacks, Mediant 1000 / 2000 / 3000,
IPmedia 2000 / 3000

18.

PM File Generate - Mediant 5000 / 8000

Summary of Contents for LTRT-94602



































































Search results

Summary of Contents for LTRT-94602

Reviews:

Related manuals for LTRT-94602

Brands by name

Popular brands

AudioCodes LTRT-94602, Manual

Search results

Summary of Contents for LTRT-94602

Reviews:

Related manuals for LTRT-94602

Brands by name

Popular brands