EMS Alarm Guide
28
Document #: 94602
EMS
Table 2-6: Operational Info
Description
In the current version, this alarm gathers all events (not only errors)
caused by either actions performed by Operators or by operation of the
Media Gateway itself. All operational events are reported through this
alarm. For example, a System Controller switchover event or an SC
failure is reported through OperationalInfo. The problem description is
provided in the 'text' form (AdditionalInfo).
SNMP Alarm
tgOperationalInfo
SNMP OID
1.3.6.1.4.1.5003.9.1.2.2.0.7
Alarm Title
Operational Info
Alarm Source
MO Path
Alarm Type
Processing error alarm
Probable Cause
Other
Severity
Indeterminate
Additional Info
A string explaining a certain problem or event that occurred in the
system.
Examples:
'Cannot TAKEOVER board at this state'
'UNLOCK operation cannot be done while board is shutting down'
'Change clock source'
Corrective Action
Refer to the Installation & Operation Manual.
2.8 Voltage
Alarm
The table describes the alarm and shows the alarm information presented to Users. For
Users' convenience, all alarms generated by the Media Gateway have the same standard
structure, including the fields shown in the table.
Summary of Contents for LTRT-94602
Page 22: ......
