- 37 -
MC-5011 Keypad Setup
The MC-5011 Keypad combines both elegance, function, and price into a single-gang Decora
bezel.
The MC-5011 is only available with a Cat-Link connector. As such, the MC-5011 must be
wired on standard Cat. 5 cable. The MC-5011 controls the Suite 16 System. You must use
the WH-2000 Wiring Harness with the MC-5011 Keypad. There are eight standard pre-made
source formats which are listed below.
Format 1
FM1,FM2,AM,CD1,CD2,DSS,DVD,AUX
Format 2
FM1,FM2,AM,CD1,CD2,CD3,DSS,DVD
Format 3
FM1,FM2,AM,CD1,CD2,DSS,DSS,AUX
Format 4
FM1,FM2,FM3,CD1,CD2,DSS,DVD,AUX
Format 5
FM1,FM2,FM3,CD1,CD2,CD3,DSS,DVD
Format 6
FM1,FM2,FM3,CD1,CD2,DSS,DSS,AUX
Format 7
FM1,FM2,CD1,CD2,DSS,DSS,DVD,AUX
Format 8
FM1,FM2,CD1,CD2,DSS,DSS,AUX,AUX
Custom formats are also available at an additional charge. Please
note, that custom formats utilize a rubber button pad where the
eight source buttons are black and the lettering is etched clear. All
other keypad buttons are clear with black lettering ADA then etches
away the desired source label using a process that involves a laser.
Up to three characters can be used to describe a source name. This process is functional but
the letters are not as smooth as those of the eight more common formats listed above. Again,
the letters in a custom rubber are clear and the area around them is black. This only applies
to the eight source buttons. ADA suggests using one of the eight formats listed above.
The MC-5011 features a bank of twelve DIP Switches. Switches 1 and 2 determine system
model. Switch 3 sets baud rate (1200,19200), Switch 4 sets light dimming, Switch 5, 6, and 7
set source control, and switches 8, 9, 10, 11, and 12 set room number. There are also two
jumper “shunting pins” that determine if the MC-5011’s IR receiver is on or off. The second
jumper turns the LED’s off when the system is off. With jumper is
set to night mode, when the room is on, the keypad functions as
normal: the selected source is red, while all other buttons are
green. When the room is off but the system is still on elsewhere,
all buttons are off with the exception of the OFF button, which will
glow red, indicating the system is still
on somewhere. When the system is
off, all buttons are off. These charts
will assist in properly setting up the MC-
5011.
OFF
FM2
FM1
CD1
AM
DSS
CD2
AUX
DVD
VOL
DIP SWITCH #
8
9
1 0
1 1
1 2
ROOM 1
ON
ON
ON
ON
ON
ROOM 2
ON
ON
ON
ON
OFF
ROOM 3
ON
ON
ON
OFF
ON
ROOM 4
ON
ON
ON
OFF
OFF
ROOM 5
ON
ON
OFF
ON
ON
ROOM 6
ON
ON
OFF
ON
0 F F
ROOM 7
ON
ON
OFF
OFF
ON
ROOM 8
ON
ON
OFF
OFF
OFF
ROOM 9
ON
OFF
ON
ON
ON
ROOM 10
ON
OFF
ON
ON
OFF
ROOM 11
ON
OFF
ON
OFF
ON
ROOM 12
ON
OFF
ON
OFF
OFF
ROOM 13
ON
OFF
OFF
ON
ON
ROOM 14
ON
OFF
OFF
ON
OFF
ROOM 15
ON
OFF
OFF
OFF
ON
ROOM 16
ON
OFF
OFF
OFF
OFF
ROOM 17
OFF
ON
ON
ON
ON
ROOM 18
OFF
ON
ON
ON
OFF
ROOM 19
OFF
ON
ON
OFF
ON
ROOM 20
OFF
ON
ON
OFF
OFF
ROOM 21
OFF
ON
OFF
ON
ON
ROOM 22
OFF
ON
OFF
ON
OFF
ROOM 23
OFF
ON
OFF
OFF
ON
ROOM 24
OFF
ON
OFF
OFF
OFF
ROOM 25
OFF
OFF
ON
ON
ON
ROOM 26
OFF
OFF
ON
ON
OFF
ROOM 27
OFF
OFF
ON
OFF
ON
ROOM 28
OFF
OFF
ON
OFF
OFF
ROOM 29
OFF
OFF
OFF
ON
ON
ROOM 30
OFF
OFF
OFF
ON
OFF
ROOM 31
OFF
OFF
OFF
OFF
ON
ROOM 32
OFF
OFF
OFF
OFF
OFF
DIP SWITCH #
1
2
3
DELTA @ 1200
OFF
OFF
ON
DELTA @ 19200
OFF
OFF
OFF
MILLEN @ 1200
ON
OFF
ON
MILLEN @19200
ON
OFF
OFF
SUITE 16 @ 1200
ON or OFF
ON
ON
SUITE 16 @19200
ON or OFF
ON
OFF
DIP SWITCH #
5
6
7
SOURCE CONTROL OPTIOINS
SETTING 1
ON
ON
ON
IRL-3000 SOURCES 1-8 CORRESPOND TO SOURCES 1-8
SETTING 2
ON
ON
OFF
TRINITY TUNER SOURCES 1-3, IRL-3000 SOURCES 4-8
SETTING 3
ON
OFF
ON
TRINITY SOURCES 1-3, SPECIAL CD 1 SOURCE 4, IRL SOURCES 5-8
SETTING 4
ON
OFF
OFF
TRINITY SOURCES 1-3, SPECIAL CD 1 & 2 SOURCES 4 & 5, IRL SOURCES 6-8
SETTING 5
OFF
ON
ON
TRINTIY SOURCES 1 & 2, IRL-3000 SOURCES 3-8
SETTING 6
OFF
ON
OFF
TRINITY SOURCES 1 & 2, SPECIAL CD SOURCE 3, IRL-3000 SOURCES 4-8
SETTING 7
OFF
OFF
ON
TRINITY SOURCES 1 & 2, SPECIAL CD 1 & 2 SOURCES 3 & 4, IRL SOURCES 5-8
SETTING 8
OFF
OFF
OFF
IRL-3000 SOURCES 1-3 & 5-8, SPECIAL CD 1 SOURCE 4
IRL-3000 PORTS 1-8 ALWAYS CORRESPOND TO SOURCES 1-8. SPECIAL CD IS USED WITH AQUARIUS & ESCIENT PRO MK II/III
