- 78 -
RESET TO FACTORY DEFAULT VALUES
Resets all parameters to factory default values. All volumes and volume presets are set to
half, bass and treble set flat, balance and balance presets set to equal, stereo enhance off,
loudness contour off, stereo mode on, mute off, all rooms off, all input trims 0, all page groups
cleared, all parties cleared, all tone presets, bass and treble set flat, stereo enhance off,
loudness contour off, auto page off, maximum volume per room set to 40, page volume per
room set to 30, auto page mode off, power up on last room parameters.
EXAMPLE
‘SFDEFG00<cr>
reset unit to factory default values
Feedback
‘AXFDEFG00<cr>
UPDATE ALL ROOM PARAMETERS
This is a global command which will feedback all parameters of every room in the system and
also global parameters . This command can be requested only.
EXAMPLE
‘GALRMG00<cr>
Feedback
‘AXPAO#G00<CR>
auto page on/off
‘AXIT01G##<CR>
input trim 1
‘AXIT02G##<CR>
input trim 2
‘AXIT03G##<CR>
input trim 3
‘AXIT04G##<CR>
input trim 4
‘AXIT05G##<CR>
input trim 5
‘AXIT06G##<CR>
input trim 6
‘AXIT07G##<CR>
input trim 7
‘AXIT08G##<CR>
input trim 8
‘AXIT09G##<CR>
input trim 9
‘AXIT10G##<CR>
input trim 10
‘AXIT11G##<CR>
input trim 11
‘AXIT12G##<CR>
input trim 12
‘AXIT13G##<CR>
input trim 13
‘AXIT14G##<CR>
input trim 14
‘AXIT15G##<CR>
input trim 15
‘AXIT16G##<CR>
input trim 16
and then same feedback as update room for each room
