- 73 -
BALANCE STORE 1-2
Allows you to store 2 balance settings for a given room. The current active balance setting is
stored. No function when room is off. Feedback request allowed when room is off.
EXAMPLE
‘SBLS1R01<cr>
store current room 1 balance setting in
balance recall 1
Feedback
‘A1B###R01<cr>
Feedback request
‘GBLS1R01<cr>
request balance store 1 for room 1 or
‘GBLS2R01<cr>
request balance store 2 for room 1
Feedback
‘A1B###R01<cr> or
balance stored in balance preset 1 for room 1
`A2B###R01<cr>
balance stored in balance preset 2 for room 1
BALANCE RECALL 1-2
Allows you to recall 2 pre-stored balance setting for a given room. No function when room is
off. Feedback request allowed when room is off.
EXAMPLE
‘SBLR1R01<cr>
make balance recall 1 active for room 1
Feedback
‘AXB###R01<cr>
current balance value for room 1
Feedback request
‘GBLR1R01<cr>
request balance store 1 for room 1 or
‘GBLR2R01<cr>
request balance store 2 for room 1
Feedback
‘A1B###R01<cr> or
balance stored in balance preset 1 for room 1
‘A2B###R01<cr>
balance stored in balance preset 2 for room 1
INPUT LEVEL TRIM 1-16
This is a global command that allows you to trim louder input sources so they may be at
relatively even volumes with other sources. When properly set any source can be selected
and the volume for that room should not have to be re-adjusted. Every room in the system will
attenuate the source by the value set, if any, with this command. The command structure is
the function code selects which input trim to adjust followed by G for global and the 2 digit trim
value. A trim level set to 00 will cause no attenuation for that input. Each value of trim is about
1.5dB of attenuation.
EXAMPLE
‘SIT01G01<cr>
Set input trim 1 for 1.5dB attenuation
‘SIT16G02<cr>
Set input trim 16 for 3dB attenuation
‘SIT02G00<cr>
Set input trim 2 for no attenuation
Feedback
‘AXIT##G##<cr>
Feedback request
‘GIT##G00<cr>
Feedback
‘AXIT##G##<cr>
