- 79 -
UPDATE ALL ROOM CONTROLS
This is an abridged request that only replies with certain room parameters for all rooms as
follows:
EXAMPLE
‘GALRCG00<cr>
Feedback *this feedback sequence is repeated for each room
‘AXV###R##<cr>
volume
‘AXB###R##<cr>
bass
‘AXT###R##<cr>
treble
‘AXB###R##<cr>
balance
‘AX####R##<cr>
current input or room off or all off
‘AXVPO#R##<cr>
volume preset on/off
‘AXMV##R##<cr>
max volume
‘AXMTO#R##<cr>
mute on or off
‘AX ####R##<cr>
stereo or mono in L or mono in R
‘AXLDO#R##<cr>
loudness contour on/off
‘AXSEO#R##<cr>
stereo enhance on/off
UPDATE A SINGLE ROOM CONTROL
This is like the Update All Room Controls command but replies with information for a single
room.
EXAMPLE
‘GRCONR01<cr>
Feedback
‘AXV###R01<cr>
volume
‘AXB###R01<cr>
bass
‘AXT###R01<cr>
treble
‘AXB###R01<cr>
balance
‘AX####R01<cr>
current input or room off or all off
‘AXVPO#R01<cr>
volume preset on/off
‘AXMV##R01<cr>
max volume
‘AXMTO#R01<cr>
mute on or off
‘AX ####R01<cr>
stereo or mono in L or mono in R
‘AXLDO#R01<cr>
loudness contour on/off
‘AXSEO#R01<cr>
stereo enhance on/off
UPDATE ROOM
All parameters for any single room
EXAMPLE
‘GROOMR##<cr>
Feedback
‘AXV###R01<cr>
volume
‘AXB###R01<cr>
bass
‘AXT###R01<cr>
treble
‘AXB###R01<cr>
balance
