- 41 -
SET DATE - After setting the month, use the > button to advance the display to SET DATE
and then press << or >> once. Again the display will read the current date and time, as an
example, FEB14 23:33. At this time, pressing >> or << will advance or decline through the
numeric date. When the desired date is displayed, use the > button to advance to:
SET DAY - After setting the date, use the > button to advance the display to SET DAY and
then press << or >> once. The display will read the current day, as an example, THU. At this
time, pressing >> or << will advance or decline through the seven days. When the desired
day is displayed, use the > button to advance to:
SET 12-24 HR - After setting the day, use the > button to advance the display to SET 12-24
HR and then press << or >> once. The display will read 12 HOUR MODE or 24 HOUR
MODE. At this time, pressing >> or << will switch between these two options. While all other
features are loaded into the CMB-1, thus not requiring you to do this process for each and
every keypad, the 12/24 display setting must be altered on a per keypad basis. This is the
only Clock/Calendar associated setting that is not global. When the desired clock mode is
displayed, use the > button to advance to:
SET YEAR - After setting the 12/24 hour mode, use the > button to advance the display to
SET YEAR and then press << or >> once. The display will read the current year, as an
example, 2002. At this time, pressing >> or << will advance or decline through the available
years (2000-2099). For systems that are still operational in 3000, ADA will suggest upgrading
the MC-5000 software. When the desired month is displayed, use the > button to advance
back to SET HOURS or press the EXTRA button to exit this setup mode.
Exiting the Clock/Calendar Setup
If you wish to exit this setup mode at any given time, press the EXTRA button.
MC-5000 Installer Setup
Unlike the previous setup features, those found under Installer Setup are more involved to the
systems underlying programming. It is here, that the feature set of the MC-5000 when used
with the Suite 16 System is fully realized. Prior to entering the code the Version # will appear.
To enter the installer area, press and hold the extra button until the display reads:
CODE __ __ __ __
Enter the code “1867” using the source buttons where the number one is the first source on
the left while the number eight is the last source, that on the far right. When the code is
entered correctly, the display will read:
INSTALLER
The first stage of this sequence is the connection of the keypad’s eight source buttons to the
16 inputs on the Suite 16. Pressing the >> or << buttons will advance through these options:
INPUT CONFIG - SOURCE CNTRL - SOURCE LABEL - CHECK SETUP - PROGRAM ALL
