- 55 -
Room Control Page
Under the Room Control tab, you can set and control all of the audio parameters specific to
that room.
Begin by selecting a room number using the pull-down room window.
To update the PC’s display with this room’s status, you will need to
press the little square (orange/red) located in the lower left-hand
corner of this window. The numeric fields for volume, maxi-
mum volume, paging volume, treble and bass will populate. Also,
the existing room state will indent regarding all off, room off, or
current audio input as well as turn-on option, stereo-L/R mode, tone
filters on/off, party groupings and page groupings.
The image below details the entire Room Control page. Details for
this page are discussed in the following pages.
