- 45 -
Exiting Trinity Tuner Setup
To exit the Trinity Tuner from the lowest level, you will need to press the < button twice. The
first time will return you to the address level, the second time will return you to ADA TUNER
with the following options available.
IR LEARNER - ADA TUNER - SPECIAL CD - LVI - NO FUNCTION
Using the >> or << buttons, you can proceed to Special CD or LVI. By pressing the < button
you can return to the primary menu level which includes the following:
INPUT CONFIG - SOURCE CNTRL - SOURCE LABEL - CHECK SETUP - PROGRAM ALL
Special CD
To engage a special CD setting, you must first be certain that you have a component that
specifically operates on ADA Special CD commands. ADA’s Aquarius Hard Drive, Escients
Tunebase Pro Mk II and III, or Media Access Solutions Hard Drive players are embedded with
the Special CD command sets.
To navigate to this setting, make certain you are in the SOURCE CNTRL level and using the
>> or << buttons, advance until the display reads:
SPECIAL CD
Then press >. The display will read:
SPECIAL CD 1
were as many as eight options exist including the following:
To lock a source button to track one of the special cd options, press the source button while
the display shows the corresponding Special CD address number. The display will confirm
CD OK. To advance to an alternate address setting, press the >> or << button. To return to
the previous level, press the < button.
LVI-3800
The LVI-3800 is a low voltage relay control device that provides up to seven contact closures
corresponding to a keypads: >, <, >>, <<, stop, pause, and main buttons. It is useful for
controlling devices that lack either an IR or RS-232 control interface. To lock a source button
to control the LVI-3800, make certain that you are in the SOURCE CNTRL. Use the >> or <<
buttons to navigate until the display reads:
LVI
Press > to enter the LVI menu and the display will read LVI 1 with eight possible options. Use
the >> or << buttons to advance between these options LVI 1 through LVI 8. When the
desired LVI address is displayed, press the source button and the keypad will confirm LVI OK.
To exit this level, press the < button.
No Function
When NO FUNCTION is displayed, pressing a source button will cause that source’s trans-
port buttons to have absolutely no source control. The display will confirm NONE OK.
SPECIAL CD 1
SPECIAL CD 2
SPECIAL CD 3
SPECIAL CD 4 SPECIAL CD 5 SPECIAL CD 6 SPECIAL CD 7 SPECIAL CD 8
