- 82 -
3.
VIDEO FOLLOWING AUDIO/INDEPENDANT VIDEO
has feedback
This function is assignable for every input in any given room. That way if only a few of the
inputs are video components only those set will follow audio selections. If following is set for
any input in a room, the remaining inputs not set to follow will turn off the room video output
when selected. If following is not set for any input in a room, the video functions indepen-
dently without any audio interaction at all.
Code examples
‘SFS01R01<cr>
video input 1 will follow audio in room 1
‘SFC01R01<cr>
video input 1 will not change with audio in room 1
4.
PARTY COMMAND
Works just like audio party command but with no feedback using same set up commands as
the P-16 audio card. Keep in
mind video following settings will affect the party commands.
5.
HARDWARE TRIGGER VIDEO INPUT ASSIGN
has feedback
This serial command assigns which video inputs are used in conjunction with each of the four
hardware triggers and fifth serial only trigger. Up to 16 inputs can be assigned to a trigger.
Code examples
‘SHI1SG01<cr>
assign to hardware trigger 1 video input 1
‘SHI4SG16<cr>
assign to hardware trigger 4 video input 16
‘SHI2CG15<cr>
disable from hardware trigger 2 video input 15
6.
TRIGGER OUTPUT ASSIGN
has feedback
This serial command assigns room outputs to one of the five trigger groups.
Code examples
‘SHO1SR01<cr>
Set room 1 to trigger 1
‘SHO1CR01<cr>
Clear room 1 from trigger 1
‘SHO5SR16<cr>
Set room 16 to trigger 5
‘SHO3CR08<cr>
Clear room 8 from trigger 3
7.
SOFTWARE CONTROL OF HARDWARE TRIGGERS
This is a global serial command to activate triggers by command string. Result is same as if
activated by hardware trigger. Trigger 5 is serial controlled only.
Code examples
‘STRG1G00<cr>
activate trigger 1
‘STRG2G00<cr>
activate trigger 2
‘STRG3G00<cr>
activate trigger 3
‘STRG4G00<cr>
activate trigger 4
‘STRG5G00<cr>
activate trigger 5
