Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
39 – Final Drive, Differential
1
Final Drive
⇒ “1.1 Overview - Final Drive”, page 146
⇒ “1.2 Front Final Drive Cover O-ring, Removing and Installing”,
1.1
Overview - Final Drive
Note
♦
Clean working conditions for the automatic transmission. Re‐
⇒ “3.1 Clean Working Conditions, Guidelines”, page 5
.
♦
General repair instructions. Refer to
⇒ “3.3 General Repair Information”, page 6
.
1 - Right Flange Shaft
❑ Removing and instal‐
ling. Refer to
2 - Circlip
❑ Always replace
3 - Shaft Seal
❑ For the right flange shaft
❑ Replace. Refer to
4 - Sealing Plug
❑ For the hole for check‐
ing and filling
❑ For the transmission flu‐
id inside the front final
drive
❑ Tightening specification
-Item 2-
5 - Cover
❑ For the front final drive
❑ Pay attention to the
alignment sleeves
6 - Shim
❑ Behind the taper roller
bearing outer race
7 - Taper Roller Bearing Outer
Race
8 - O-ring
❑ On the front final drive cover
❑ Removing and installing. Refer to
⇒ “1.2 Front Final Drive Cover O-ring, Removing and Installing”, page 148
Audi Q5 2008 ➤ , Audi Q5 China 2010 ➤
8-Speed Automatic Transmission 0BK AWD - Edition 04.2017
146
Rep. Gr.39 - Final Drive, Differential
