Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Coat locking piece -1- with lubricant.
– Bring the starter -1- with the locking piece -2- into the installed
position -4- by supporting the starter on the engine bracket
using a plastic or rubber wedge -3-.
Note
In this assembly overview pay attention, that the locking piece are
in the correct installed position with the starter, if not the starter
support bolts are difficult to install and the locking piece will no
longer have its sealing capability.
Vehicles with 4-Cylinder Engine
– Install the upper starter bolt -2- in the transmission.
– Install spacer sleeve -arrow- on the bolt -2-.
All Vehicles
– Position the transmission on the engine and tighten the bolts
-6 through 11-.
– Fasten the starter with the bolts -1 and 2- while doing so make
sure the locking piece fits correctly.
– Remove the -T40170- .
Audi Q5 2008 ➤ , Audi Q5 China 2010 ➤
8-Speed Automatic Transmission 0BK AWD - Edition 04.2017
98
Rep. Gr.37 - Controls, Housing
