Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Turn the locking ring all the way in direction of -arrow- until it
locks and the markings -a and b- line up.
Caution
Danger of causing damage to the selector lever handle.
♦ The locking ring can be turned only when the handle is
installed completely.
– Remove cable ties or assembly tools. The locking button
mechanism will engage in the vertical groove on the selector
lever. If necessary, press the locking button into the selector
lever handle.
– Move the button mechanism through “R” and “S” to perform
the function test.
• If the selector lever positions cannot be reached, remove the
handle again. Refer to
⇒ “1.8 Selector Lever Handle, Removing and Installing”, page
.
– Pull the selector lever boot downward and attach it to the Mul‐
timedia System Control Head - E380- .
1.8.4
Selector Lever Handle with Front Lock‐
ing Button, Removing and Installing, Ve‐
hicles from MY 2013
Special tools and workshop equipment required
♦ Trim Removal Wedge - 3409-
♦ Thin cable ties or the assembly aid for the button on the han‐
dle. The assembly aid is already installed at the factory when
a new handle is ordered.
Removing
– Press the button on the electro-mechanical parking brake to
activate it.
– Move the selector lever into “N”.
Note
Both the selector lever handle and the selector lever boot are re‐
moved.
– Carefully pry out the selector lever boot on the side using the
-3409- -arrows-.
Audi Q5 2008 ➤ , Audi Q5 China 2010 ➤
8-Speed Automatic Transmission 0BK AWD - Edition 04.2017
1. Selector Mechanism
39
