Atlas Copco DYNAPAC Svedala Demag DF 115 C, Operation & Maintenance Manual

Page: 59 / 236

D 1.4 1
D_1
.4_0
1_G
B.
fm
1
-22
D 1.4 Operation
1 Safety regulations
f Starting the engine, the traction drive, the conveyor, the auger, the screed or the lifting
devices can cause injuries or even the death of persons.
Make sure before starting any of these devices that no-one is working at, in or be-
neath the paver finisher or within its danger area!
- Do not start the engine or do not actuate any controls when this is expressly forbid-
den!
Unless otherwise specified, the controls may only be actuated when the engine is
running!
f Never crawl into the auger tunnel or step into the hopper or onto the conveyor. Dan-
ger to life and limb!
- Always make sure during operation that no-one is endangered by the machine!
- Ensure that all protective covers and hoods are fitted and secured accordingly!
- When damages are detected, eliminate them immediately! Operation must not be
continued when the machine is defective!
- Do not let any persons ride on the paver finisher or the screed!
- Remove obstacles from the road and the work area!
- Always try to choose a drivers’s position that is opposite to the flowing traffic! Lock
the operating panel and the driver’s seat.
- Keep a sufficient safety clearance to overhanging objects, other machines and
points of danger!
- Be careful when travelling on rough terrain to keep the paver finisher from slipping,
tipping or turning over.
f Always be the master over the machine; never try to use it beyond its capacities!