www.atestgaz.pl
Icon
Description
Pressing two neighboring push buttons enables user’s interface test (see section 5.4).
If at least one of the relay outputs is configured for operation with an NC valve, the display will
show information about the possibility of opening the valve (see chapter 4.5).
If at least one of the relay outputs is configured for operation with an NC valve, the display will
show information about the possibility of closing the valve (see chapter 4.5).
Table 9: Push button functions
5.6
Detailed detector view
The screen is divided into a few sections (see figure 20).
Detector panel – see section 5.5.
Detector No. – detector system number.
Detector location – information on physical detector location.
Detector indication – current value measured by the detector.
Detector status
This section presents a text description of the detector status. Possible messages include:
Message
Description
<no message>
The detector operates correctly, measures gas concentration, no exceeding or special
situations.
WARNING 1
WARNING 2
ALARM
Detector indication above warning 1,
warning 2,
or alarm threshold.
FAULT :<fault code>
The detector fault, it does not measure. Fault code – see gas detector manual. Text message
explaining fault code – see detector's menu – see section 5.8.
NC.FAULT: <fault code> Detector malfunction measurement accuracy loss. Fault code – see gas detector manual.
Text message explaining fault code – see detector's menu – see section 5.8.
OVERLOAD
Gas concentration is above the overload value.
p. 23|38
User's Manual: POD-026-ENG R17
Figure 20: Screen showing detailed detector view
Pushbutton
functions
Detector
status
Detector panel
Detector No.
Location
Detector indication
