www.atestgaz.pl
3
Design description
Figure 3: Module design
4
Input/output interfaces
Connector marking
Connector name
Description
J1
Internal communication
interface connector
Connector used by the cooperating device for power supply and
communication with the module
J2
Power supply connector
– terminal block
Connector used to power the module during configuration when
it is removed from the cooperating device. Parameters – see
Table 5
J3
Ethernet connector
Connector used to connect the module to an Ethernet (LAN)
-
Power supply connector
– microUSB
Connector used to power the module during configuration when
it is removed from cooperating device
Table 1: Connectors description
5
User interface
User interface – is used to monitor device operation and consists of:
two LED indicators
Indicator
Status / colour
Description
LED1
/ green
OPERATING LED indicator
LED2
/ yellow
FAULT LED indicator
Table 2: LED Indicator description
SW1 configuration button – see Figure 3.
Atest Gaz
A. M. Pachole sp. j.
ul. Spokojna 3, 44-109 Gliwice, Poland
VAT No.: PL 9691433231
tel.: +48 32 238 87 94
fax: +48 32 234 92 71
e-mail: [email protected]
Appendix: PU-Z-116-ENG R03
p. 3|9
•
-
+
SW1
LED1 LED2
Ethernet connector
LED indicators
Configuration button
Internal communication
Interface connector
Power supply
connector – terminal block
PW
S-
05
0
SN
: 0
00
00
M
AC
: 0
0:0
0:
00
0
0:0
0:
00
Power supply
connector
- microUSB
