ATEN VM0808HA User Manual Download Page 74

Page: 74 / 98

VM0808HA User Manual

Maintenance

The

Maintenance

page lets users upgrade the VM0808HA’s firmware and

back up or restore system settings. This is an Administrator only function.

To upgrade the VM0808HA’s firmware, do the following:

1. Use the

Browse

button to locate the firmware upgrade file. Make sure you

have the correct file saved on your PC.

2. Click

Upgrade

to begin the upgrade procedure.

Note:

After updating the firmware, it’s recommended that you clear your web
browser’s cache and then close and reopen the web browser. This will
ensure the GUI refreshes and functions properly.

To back up the VM0808HA’s system settings, do the following:

1. Click

Backup

A configuration file will then begin downloading.

To restore the VM0808HA’s system settings, do the following:

1. Use the

Browse

button to locate the configuration file. Make sure you

have the correct file saved on your PC.

2. Click

Restore

to begin the restoration procedure.

Note:

User accounts cannot be backed up or restored.

Summary of Contents for VM0808HA



































































































Search results

Summary of Contents for VM0808HA

Reviews:

Related manuals for VM0808HA

Brands by name

Popular brands

ATEN VM0808HA, User Manual

Search results

Summary of Contents for VM0808HA

Reviews:

Related manuals for VM0808HA

Brands by name

Popular brands