ATEN VM0808HA User Manual Download Page 54

Page: 54 / 98

VM0808HA User Manual

Connection Profiles

Digital Signage

profiles are for displays where video is viewed on separate

monitors.

Digital Signage Profile

Each icon represents an output port and the connected display. The large
number is the

Input

port selected for the display. The small number (upper-left

corner) is the

Output

port for the display. Click the icons to select options.

Select icons to choose the

Video

Input

from the

Select Source

menu.

Click the PEN icon or name to edit the profile name.

Click

Select All

to select all outputs.

Click

Unselect All

to unselect all outputs.

Click

Save

to save the profile or

Save as

to save as a different profile

number.

Click

Grid View

to use an alternate method for configuring connection

profiles (see page 43).

Summary of Contents for VM0808HA



































































































Search results

Summary of Contents for VM0808HA

Reviews:

Related manuals for VM0808HA

Brands by name

Popular brands

ATEN VM0808HA, User Manual

Search results

Summary of Contents for VM0808HA

Reviews:

Related manuals for VM0808HA

Brands by name

Popular brands