ATEN VM0808HA, User Manual

Page: 33 / 98

Chapter 3. Front Panel Configuration
21
LCD Menu Organization
The VM0808HA has a built-in configuration utility via the front panel LCD,
which can be controlled by pressing the
MENU and front panel Input
pushbuttons (1–8). User can cycle through the menu options, starting from IP
Setting page, in the order shown in the table below:
Note: The highlighted values are the default settings of the VM0808HA.
Menu Pushbutton
Press the MENU pushbutton to switch between the Main Screen and LCD
Menu page. When the Menu is active, the MENU pushbutton’s built-in LED
lights up:
From the Menu page:
Š Press 1 to go to the IP Setting page (see IP Setting , page 22)
Š Press 2 to go to the Serial Port Setting page (see Serial Port Setting ,
page 23)
Menu Page Sub-Menu Page(s)
IP Setting IP Address
Subnet Mask
Gateway
Serial Port Setting Baud Rate Setting 9600 / 19200 / 38400 / 115200
Operation Mode EDID Mode Default / Port 1 / Remix / Customized
CEC On / NA
Output Status Video On / NA
Security Mode Mode None
Password Enable
Lock Screen
Change Password Old Password New Password
Save to a Profile Save to a Profile No. 1-8
Play/Stop the Profile Schedule
1: IP Setting
2: Serial Port Setting
8: Next