ATEN VM0808HA, User Manual

Page: 40 / 98

VM0808HA User Manual
28
Change Password
1. To change the password for accessing the unit, press pushbutton 2 .
2. In the Old Password field, the cursor flashes at the first digit. Enter the old
password (see Enter Password , page 16). If the old password is entered
correctly, you can proceed to the next step.
Note: If you entered an incorrect password, an error message appears and the
cursor goes back to the first digit (flashing). The Incorrect Password
message clears as soon as a new digit is entered.
3. In the New Password field, the cursor flashes at the first digit. Enter the
new password using the front panel number pushbuttons (1111–8888).
4. Re-enter the new password in the following screen. The new password is
applied by the VM0808HA immediately.
If the password you entered does not match the one entered in the previous
screen, an error message appears. Enter the new password correctly.
5. Press Menu to return to the Menu page.
6. Press Cancel to return to the previous step without saving.
1. Mode: None
2. Change Password
Old Password: * * * *
Incorrect Password
New Password: * * * *
Re-enter New Password: * * * *