ATEN VM0808HA, User Manual

Page: 39 / 98

Chapter 3. Front Panel Configuration
27
Security Mode
The Security Mode page allows users to manage the VM0808HA’s security-
related settings. Three security modes are available: None, Password Enable
and Lock Screen. The VM0808HA’s password can also be changed here.
To configure the VM0808HA’s security settings from the Main Screen, use the
Menu pushbutton to access the Menu page, press 8 or Next to navigate to the
next page, then press pushbutton 2 to access the Security Mode page.
Mode
1. To change the VM0808HA’s security mode, press pushbutton 1 in
Security Mode.
2. In the Mode menu, to disable security settings, press pushbutton 1 . The
menu will then return to Security Mode. To require a password after the
LCD display times out or is powered off/on, press pushbutton
2 . The menu
will then return to the home screen.
Note: If Password is Enabled, the LCD display’s default time-out is 5 minutes.
The VM0808HA’s default password is 1234.
3. To enable a lock screen, press 8 or Next to navigate to the next page, then
press pushbutton 1 . The menu will then return to the home screen. When
Lock Screen is enabled, pressing any pushbutton from the home screen
will trigger the following message:
Please press “Menu” to start.
4. Press Menu to return to the Menu page.
5. Press Cancel to return to the previous step without saving.
1: Operation Mode
2: Security Mode
8: Next
7: Back
1. Mode: None
2. Change Password
1. None (In Use)
2. Password Enable
8: Next
1. Lock Screen 7: Back