ATEN VM0808HA User Manual Download Page 21

Page: 21 / 98

Chapter 2

Hardware Setup

Rack Mounting

The VM0808HA can be mounted in a 19” (1U) system rack. For the most
convenient front panel pushbutton configuration and operation at the local site,
mount the unit at the front of the rack, as follows:

1. Use the M3 x 8 Phillips head hex screws supplied with the Rack Mount

Kit to screw the rack mounting brackets onto the front of the unit.

(Continues on next page.)

1. Important safety information regarding the placement of this

device is provided on page 81. Please review it before
proceeding.

2. Make sure that the power to all devices connected to the

installation are turned off. You must unplug the power cords of
any computers that have the Keyboard Power On function.

Phillips Head Hex
M3 x 8

Summary of Contents for VM0808HA



































































































Search results

Summary of Contents for VM0808HA

Reviews:

Related manuals for VM0808HA

Brands by name

Popular brands

ATEN VM0808HA, User Manual

Search results

Summary of Contents for VM0808HA

Reviews:

Related manuals for VM0808HA

Brands by name

Popular brands