ATEN VM0808HA User Manual Download Page 4

Page: 4 / 98

VM0808HA User Manual

Package Contents

The VM0808HA package consists of:

1 VM0808HA 8x8 4K HDMI Matrix Switch

1 Power Cord

1 IR Remote Control

1 IR Receiver

1 Mounting Kit

1 User Instructions*

Check to make sure that all the components are present and that nothing got
damaged in shipping. If you encounter a problem, contact your dealer.

Read this manual thoroughly and follow the installation and operation
procedures carefully to prevent any damage to the unit, and/or any of the
devices connected to it.

Features may have been added to the VM0808HA since this manual was
published. Please visit our website to download the most up-to-date version.

Manual Part No. PAPE-0349-AT1G

Manual Date: 2016-12-28

All other brand names and trademarks are the registered property of their respective owners.

Summary of Contents for VM0808HA



































































































Search results

Summary of Contents for VM0808HA

Reviews:

Related manuals for VM0808HA

Brands by name

Popular brands

ATEN VM0808HA, User Manual

Search results

Summary of Contents for VM0808HA

Reviews:

Related manuals for VM0808HA

Brands by name

Popular brands