ATEN VM0808HA, User Manual

Page: 28 / 98

VM0808HA User Manual
16
Enter Password
Upon VM0808HA startup, check the front panel LCD to view the loading
progress. If the Password screen / LCD Menu fails to load, an error message
displays. Reset the unit and try again.
If you are accessing the VM0808HA for the first time, the Password screen
appears as soon as the LCD loading process is done. Enter the default password
1234 to continue to the Main Screen (see
Main Screen , page 17).
Additionally, the Password Screen appears if the VM0808HA has been
configured to require a password for Front Panel operation (see
Security Mode ,
page 27).
To enter a password, do the following:
1. In the Enter Password field, check that the cursor is at the first asterisk
(*) and flashing.
2. Use the front panel Input Port pushbuttons (1–8) to enter the 4-digit
password. After the fourth digit has been entered correctly, the Main
Screen displays.
3. Press Cancel to clear the password. The digits revert to 4 asterisks and the
cursor goes back to the first asterisk.
Note: 1. The VM0808HA password can be any four digit combination
between 1111 to 8888 (VM0808HA). The default password is
1234.
2. If you enter an incorrect password, the cursor goes back to the
first digit and reverts to flashing. The Incorrect Password message
displays at the bottom of the screen, but clears as soon as a new
password is entered.
3. If Password option is Enabled (see Security Mode , page 27), the
LCD display time-out is 5 minutes by default.
Enter Password: * * * *
Incorrect Password