ATEN VM0808HA User Manual Download Page 57

Page: 57 / 98

Chapter 4. Browser Operation

System Settings

Click the

Settings

link from the Main page for the

System Settings

to open on

the

General

page:

The

General

page allows you to edit Baud and Language settings and

view device information.

The

User Account

page allows you to add and edit user accounts.

The

Port Name

page allows you to name each input and output port.

The

Network

page allows configuration of the network settings.

The

EDID

page is used to set the EDID modes.

The

Maintenance

page is for upgrading the device’s firmware.

The

HDCP

page is lets users view and set HDCP key settings.

The

CEC

page allows users to control port CEC settings.

Click

Back to Profile List

to return to the Main page.

Summary of Contents for VM0808HA



































































































Search results

Summary of Contents for VM0808HA

Reviews:

Related manuals for VM0808HA

Brands by name

Popular brands

ATEN VM0808HA, User Manual

Search results

Summary of Contents for VM0808HA

Reviews:

Related manuals for VM0808HA

Brands by name

Popular brands