CM5000 User Manual
UM-CM5000-FW3.5.2.0-REV0.0
2019-07-08
www.ateme.com
Page 30
4. User's Interfaces
4.1. Configuration tools
There are 3 different ways to configure your CM5000:
• Front Panel access (see Section 4.2, “ Front Panel ”),
• Web interface (see Section 4.3, “ Web GUI ”),
• SNMP.
The web interface provides access to all the parameters but need a network connection to be used. The Front Panel
interface provides access to all the operational parameters and most of the system ones. Choose the most appropriate
way depending on your overall system’s design.
4.2. Front Panel
The CM5000 has a local LCD and keypad interface allowing a simple management of the unit.
The control buttons and LCD provide an easy method of setting the network interface addresses and default gateway
parameters directly from the front of the CM5000 System without using a management computer.
No IT knowledge is required and the CM5000 can be up and running in minutes.
Next figure describes the front panel sub-elements' identification.
Figure 4.1. Front Panel sub-elements' identification
4.2.1. Status LED
The CM5000 comes with a complete range of LEDs that report the device status.
